PDA

View Full Version : plugs


5point_Slow
Apr-11th-04, 4:15 pm
I changed out my plugs today hoping for better performance and gas mileage lol. Well gas mileage if i was driving nice but anyways I pulled out my plugs and they were some odd kind of platinum split fires and i replaced them with some new bosch platinum single tips(no splits) and it made quite a nice difference. Car starts up faster and its getting up in the RPM's a lil bit quicker. I thought it wasn't bad for $17

Mr. Merk
Apr-11th-04, 8:58 pm
nice, i prob need to get some new ones, i run autolites, platinums in my engine foul out really fast, i may consider getting NGKs

btw: i got a hypertech chip on ebay today for $78 :thumbup:

notquiteahoe
Apr-11th-04, 10:12 pm
split fires are crap plugs. they lose their gap really easily from what i've read. the old one's were probably way off causing your car to run like that.

you've had that car for liek a year, and you've been spending all this money on it and you've never pulled and changed the plugs :huh: shit dude, that stuff should've been first.

oh yeah, if you have any fuel mods plat. plugs are a bad thing.

on a side note. i pulled all mine today too, nice and tan :)

Mr. Merk
Apr-11th-04, 10:21 pm
Originally posted by abrasivecarbide@Apr 11 2004, 10:12 PM
on a side note. i pulled all mine today too, nice and tan :)
i bet that was PITA, that 3.0 is tight in there huh? the 2.9 is a pain sometimes in my truck, and its RWD

notquiteahoe
Apr-11th-04, 10:26 pm
Originally posted by MerkurV6Truck@Apr 11 2004, 09:21 PM
i bet that was PITA, that 3.0 is tight in there huh? the 2.9 is a pain sometimes in my truck, and its RWD
not really, the only one that is tought is #6 i believe it is, the one right behind the alternator. the three on the "rear" of the engine are easier than the front. it's a lot easier with the strut bar and intake manifold off, but i didnt feel like spending 10 more minutes doing that today :P

Mr. Merk
Apr-11th-04, 10:37 pm
you checked this out yet?

RangerPowerSports 3.0 board (http://www.rangerpowersports.com/forum/forumdisplay.php?s=&forumid=10) :thumbup:

notquiteahoe
Apr-11th-04, 10:48 pm
yeah, im registered there, dont ever post just read a lot. i also read at the tarus forums too, lol B)

Mr. Merk
Apr-11th-04, 11:02 pm
Originally posted by abrasivecarbide@Apr 11 2004, 10:48 PM
yeah, im registered there, dont ever post just read a lot. i also read at the tarus forums too, lol B)
sweet, i used to browse TCCA :lol:

04Mazda6s
Apr-12th-04, 3:47 am
Originally posted by cobra50@Apr 11 2004, 09:15 PM
I changed out my plugs today hoping for better performance and gas mileage lol. Well gas mileage if i was driving nice but anyways I pulled out my plugs and they were some odd kind of platinum split fires and i replaced them with some new bosch platinum single tips(no splits) and it made quite a nice difference. Car starts up faster and its getting up in the RPM's a lil bit quicker. I thought it wasn't bad for $17
sorry but i hate bosch. I have Halo plugs, there pretty good though I do like the NGK's a lot!!

5point_Slow
Apr-12th-04, 12:13 pm
sorry but i hate bosch. I have Halo plugs, there pretty good though I do like the NGK's a lot!!
I could have got something else but the day before that i had just bought a MSD TFI blaster coil for some odd reason. I dont really need it but it looks nice lol and new and red.
oh yeah, if you have any fuel mods plat. plugs are a bad thing.

Just got exhaust mods going atm. It came stock with plat plugs so i figured it wouldnt hurt any byut ford is pre stupid with things they put on their cars stock....

now im trying to decide if i should change out my wires which i really need cause they come off soooo easy or get some pulleys cause my year car really responds well to them

Mr. Merk
Apr-12th-04, 2:44 pm
Originally posted by cobra50@Apr 12 2004, 12:13 PM
i had just bought a MSD TFI blaster coil for some odd reason. I dont really need it
i do, how much do you want for it :huh:

notquiteahoe
Apr-12th-04, 4:38 pm
DUDE, matinence(sp?) first!!! do the performance shit second. you should have changed plugs, wires, radiator hoses, air filter, oil...all that crap right after you bought the car :P

if that coil didn't make a difference its because of those old wires, its probably cooking them from the inside out now anyways. when i got my blaster 2, it made a world of difference :thumbup:

Mr. Merk
Apr-12th-04, 10:08 pm
you talking to cobra? :huh:

notquiteahoe
Apr-12th-04, 10:29 pm
Originally posted by MerkurV6Truck@Apr 12 2004, 10:08 PM
you talking to cobra? :huh:
lol, yeah. sorry ^_^

95TSiEVO6GSR
Apr-14th-04, 8:40 pm
im just gonna go boost the 98 dollar ones...i think they are denso or somethin like that :rolleyes:

5point_Slow
Apr-14th-04, 9:50 pm
i do, how much do you want for it
lol im not selling it haha. once i get my wires ,MSD 6aL, and MSD distributor, ill be needing the coil. Just planning ahead thats all. I bought a K&N air filter recharge kit today :thumbup: my filter is jet black :lol:

Mr. Merk
Apr-14th-04, 9:57 pm
Originally posted by 95TSiEVO6GSR@Apr 14 2004, 08:40 PM
im just gonna go boost the 98 dollar ones...i think they are denso or somethin like that :rolleyes:
that a boy! :lol:

Bowens99GT
Apr-18th-04, 5:18 pm
I use autolite 764's.....they are copper and copper offers the best performance. At under 2 bucks a peice I love em. Only bad thing they only last 10-15k.