new stuff for the cobra

[5point_Slow]

well i have a few problem on picking out what i want based on future mods

i was thinking about getting the 2000 cobra r front bumper to replace my cobra bumper but im afraid that i wont be able to drop my car 1.5in cause the lip would scratchhttp://67.19.167.18/~ngkits/files/images/d_1935.jpg

and heres the stock cobra bumper
http://www.nwaimports.com/gallery2/albums/userpics/10001/picture12%7E9.jpg

im getting these headlights
http://images.andale.com/f2/127/115/13396688/1101435849113_1102135226925_LCLH_MST9598_JMk.jpg

and then i have to go get tires cause i don't want to wait for them to be shipped here by tire rack.

So i have $1000 to use to fix my car but we'll see what all i can do with that.

[StreetLethalCamaro]

What kind of performance mods you have? I'm really a bit more about performance than i am looks.

[5point_Slow]

haha i know what you mean about performance parts. I have long tubes, off road h pipe, magnflows, richmond 3.73's, msd coil, msd 8.5 wires, and i think thats all the performance things i have done so far but I need new headlights cause i broke mine and i think my front bumper is going to flex a lot so i need to replace it too

[StreetLethalCamaro]

Ok, sweet. I was a bit afraid you had did all the external mods without doing any performance mods. ;)

[5point_Slow]

http://www.tirerack.com/images/tires/michelin/mi_pilot_primacy.jpg

i got 2 Michelin Pilot Primacy on the back today and about to order the headlights

[notquiteahoe]

get a new stock bumper. it looks very mean. i dont' think the square lines of the 99+ stangs would look right on a SN95 body.

and get some damn springs!

[5point_Slow]

well im thinking a cobra rr hood in not too long heh :D

[5point_Slow]

opps did i just order 3 things from steeda???? lol late time spending DAMN IT and i only have $300 left. what to do what to do bwhahahahahaha

[Mr. Merk]

what have you gotten so far? i need to order a couple things from steeda as well (speedometer gear and tri-ax shifter) but i'm broke

[5point_Slow]

48" sub frame connectors speedo gear 180* stat and just ordered my headlights. Looking at the new front end tomorrow and one or two more performance parts. :evil:

[TripleZero]

Man I ordered my wheels and tires from tire rack and they were here the next morning.

[96mustangGT]

yeah i also got mine from tire rack and they got here in like 2 days, and they were cheap

[5point_Slow]

well i got a lot better deal on my tires than you can find anywhere else and i got them in less than an hour.

[Bowens99GT]

baft on front bumper, keep the cobra one u got and get cobra hood.

[SmokeyTheBear]

keep hood and bumper stock, drop that shit, itd look damn good.

[Scootro]

a steeda cold air intake are sweet item to get

[5point_Slow]

ok well i ended up not getting the 48" sub frame connectors but the full lengths These true full-length connectors run the entire length of the floor pan. They are ideal for on-track & competition cars that need the utmost chassis stiffness, but don't necessarily want a to stiffen the chassis with a fully "X-Braced" competition type cage that would interfere with the passenger compartment. The beefy 1.25 by 2 inch connectors provide additional stiffness and rigidity by connecting from the rear torque boxes all the way to the front of the front subframe. They are reinforced in key areas and include weld-on cross braces and a reinforcement plate for a more solid connection to the rear floor pan. These competition type braces require more welding than our traditional round tube subframe connectors. http://www.steeda.com/store/-catalog/suspension/FullLengthSfcLG.jpg i called steeda today and they should be here in 3 days. I also kept the stock bumper

[Mr. Merk]

cool, what about a panhard bar?? i have no idea how to adjust mine (as far as what would help) so i'm leaving it as it is

[5point_Slow]

steeda makes something better for a mustang than a panhard bar if i remember correctly for mustangs. I need to get some more HP now though