prices are going down

[Vegas]

Hey everyone this is Vegas from CUSTOM SPEED ENGINEERING.....Just wanted to say thanks to everyone that has supported me since I have been open......I appreciate everyones business and word of mouth has been great.....So come spring I am changing things up a bit....Daily I am looking for vendors that will get me the best deal so i can sell it to you for a great price....I have been open for almost a year and all my prices have been pretty reasonable.........but it is about to get better.....I want everyone to be able to afford the parts that they want so i have found ways to lower my prices on almost everything including JDM engines..
I use to sell the B16A SIR for crx/integra for $1800 shipped...now I am selling it for $1500 and so on..... Anyways i just wanted to tell everyone what was going on for the future....this is going to be a great year....... :2thumbsup:

[Mays]

is there a website to the store?

[Maliwho97]

negative captain.

[Vegas]

no not yet ...i have someone working on one for me right now ....hopefully by spring...

[Tibby]

Vegas...Today you said that You found some Vertical doors fro my Tiburon...I will buy those some time and have you install them (if Joe a.k.a SleeperTec doesnt first) and i'm also buying a carob fiber dash and a carbon fiber hood and a Comp. Chip that raises my HP from 140 to 160 :2thumbsup: SO if you could help me out with that..i'd appreciate it..I'm going to have to wait 4 more months till i'm out of school thought then i can buy what I want for my car...i am lowering it for Christmas and I'm Going to try Turbo for B-day which is Feb. 18th of 2005 and for graduation i might buy a body kit...but i might not so i might just get that Performance chip or Carbon fiber dash or Hood. :D I AM leaving my spoiler and trunk stock..I'm getting Z3 fenders, and I'm going to buy things off of EBAy.com, KSPEC.com, HyundaiPower.com, and RDTiburon.com to go along to what's under the hood because I know that I can make my car faster than my brother's 500 HP Vehicle! :laugh: I also need to change the exhaust to a quieter exhaust that doesn't sound like a bumble bee..I want to hear all motor...No exhaust sound.
:rice: <--Not me..... :shiftingfun: <-- me..but with a sports shifter.. :D

[Vegas]

sounds like you got some pretty good goals...........those doors i will get you a price next time you come in.....let me know if there is anything i can do ............ :2thumbsup:

[juggalo]

aye vegas wutcha got fer the 420A and DSM shyt?

[Vegas]

used parts wise ....i have a 95 eagle talon im selling as rolling chasis or parting out......otherwise i have a few motors laying around that i part out....( cranks, head, coil pack,etc............on performance let me know what your looking for

[Maliwho97]

Vegas, let me know if you need any help on anything bro. Ive got a 1998 integra LS shell w/ no doors, fenders, trunk, hood, suspension, but it has a full sunroof assembly, carpet, steering rack, core support, etc. You can have it if you come get it. Like I said, it has no suspension.

[Vegas]

hey man i apreciate the offer ...let me see what i can do ......hey what color is your interior ...... if you are wanting mine maybe i can trade you so u can get what you want and then i get yours so i can sell to someone.....if it will help you ....but call me for more detail

[Maliwho97]

Its no biggie, I have two sets of tan cloth interior for a teggy, leather would be nice tho. :D We'll figure something out.

[Vegas]

WORD

[juggalo]

well im looking for some under drive pullys and different odds and ends...wut i really need is a complete 5 speed tranny set up to swap out my automatic

[Terry]

vegas has done i think 2 or 3 tranny swapz and they worked really well and the last guy that had hiz done luved hiz car after dat and drove it the whole day jus cruizin around town. u should ask vegas about doin that. jus dont kno how much tho. ask him to show u da pikz on da carz he did tranny swapz on itz a sort of week long process but that is to make sure vegas has it running rite so u dun have it dead on the side of the road. :thumbup: :clap:

[Vegas]

thanks terry ...good looking out......if you are interesting in auto -5 speed change over call me at 443-4055 so i can find out ..year...etc. so i can locate parts if i dont have it ...........and get you a acurate price

[Mr. Merk]

it shouldnt be hard to swap in an eclipse 5spd

[Vegas]

I have a5 speed tranny for an eclipse/ talon for sale if you are interested :2thumbsup:

[00Exploder]

Vegas just out of curiosity, how much would an auto to standard cost?

[GotBoost?]

got a front bumper for the 98 teg ?

[Vegas]

i need to know what year and what car before i can give quote..................no i do not have front bumper ...my gsr parts car is a 94......

[00Exploder]

Well, just for the sake of say so, a 74 Mazda REPU truck? I probably wouldn't do it but just for shits and giggles.

[SleeperTec]

hahahahahahaha... thats all I have to say... :clap: it's easy on that... Get a 1st gen RX7 5 spd tranny, Hydro clutch setup for a REPU (if you can locate one), and whatever other misc parts you would need.. I know at my shop I would haveta charge at least $400 labor to get everything up and running correctly.. but I won't hunt for all the crap to do it.. thats up to you.. trucks like a REPU are pretty simple but I would keep it AUTO because of the rareness of it.. but thats me.. I would also restore it to factory specs right down to every little brake line and coolent hose and never drive it.. but thats also just me.. :maliwho:

[00Exploder]

I don't plan on swapping them. And you wouldn't drive it? Doesn't that mean letting it go to shit like you wouldn't want?

[juggalo]

aight i got a 95 avenger automatic ....420A basic set up disk in front drums out back...i need to swap mah rear brakes for some disks to but dats later.....wutcha quote me on parts and labor to get mah shyt clutchin instead of buzz shiftin?

[Vegas]

Hey man wus up...I have a 420A tranny out of A 95 EAGLE TALON (5 speed) that i will sell you for $550.00......i dont know how much the clutch pedal assembly and clutch lines and shifter would cost, but it shouldnt cost more than $250.00...or at least thats how much i usually pay...as for labor...i charge $500.00 ...anyways the best way to do it is to start collecting everything to do it first then its cake from there :2thumbsup:

[juggalo]

so 1300 installed huh?...lemme run it by mah woman and ill get back to you aight :thumbup:

[Vegas]

like i said its a ruff estimate..but yea its pretty close.....labor at least is accurate

[Maliwho97]

Vegas, OBD1 B18C1 shortblock.... How much mang? :D

[TrojanK20]

I got a 1st gen 7 w/ a 5-speed if anybody's interested

[chino]

PM me a price for a B16A installed in a 90 civic hb.

[soarerjzz30]

got any honda parts cars? I need some seat sliders.

[Vegas]

man i have a pair of civic (92-95) seats, not in the best condition but you might be able to use them................ill take $25.00 for both

[soarerjzz30]

cool, i'll try and come by today and take a look.

[stockxterer]

VEGAS... do you know anyone interested in a 90 prelude si (standard) has a cracked block. that is the only thing wrong w/ the car.. im looking to get fid of it for $400 or will trade for parts or work on my 99 accord... let me know if you know anyone interested...


H:\under4.jpg

[4banged]

Need a price on a white boost/vacum gauge...not sure on teh size but i think it's 2". hit me up at work: design@nwsprinting.com
Thnaks,
Cody

[Vegas]

up to 30psi autometer for $55.00 shipped

[soarerjzz30]

thanks for the seats.

[4banged]

Originally posted by Vegas@Jun 15 2005, 01:58 PM
up to 30psi autometer for $55.00 shipped
Thanks. Once i get my wheels sold i'll look into it some more and i might be by there...also could i get a quote on an intake for an 87 civic si. I found an hks for bout $140 shipped, but considering how little i paid for the car i would like something a little bit cheaper.
Thanks,
Cody