I need cams for '91.

[Samurai]

Anyone know where I can get some? From what I have seen, they are $350-$400. I am looking for some a little cheaper than that. If anyone knows or sees anything, keep me in mind....cash in hand presently. :maliwho:

[SmokeyTheBear]

just fyi, its only 91-93 exhaust cams, thought i would specify.

[SleeperTec]

I have a set of stock KA cams that are in great shape.. $70 + $10 shipping Pay-Pal me the $ to monicamfields@hotmail.com.. Call me 479-841-5883

[Samurai]

just fyi, its only 91-93 exhaust cams, thought i would specify.

Considering I don't ever understand what you are saying, please stay off my threads, just an FYI.

[Samurai]

I have a set of stock KA cams that are in great shape.. $70 + $10 shipping Pay-Pal me the $ to monicamfields@hotmail.com.. Call me 479-841-5883


Sounds like a great deal man, but I am trying to upgrade. I wish I could take them off your hands, though.

[Will]

I forget which company does it, but you can always just have stock cams reground to the specs you want.

it's the ghetto way to cam your car.

[I8ayellowcrayon]

Unless you want to pay $600-700 for new billet cams, its the only way. Don't be afraid of regrinds, just be afraid of who grinds them.

I think what Smokey was trying to say is, some people use the '91-93 exhaust cams; on the intake and exhaust side. If I remember correctly it allows for a bit more duration. I don't remember what all needs to be done to do that either.

What are you looking for? Stock cams? Aftermarket cams? For boost or NA? I know JWT (Jim Wolf Technology) makes cams for the KA motors.

[SleeperTec]

Sounds like a great deal man, but I am trying to upgrade. I wish I could take them off your hands, though.

Yeah, I was saying I got them for a core set you can use for regrinds.. KA cams are too fucking expensive and you can get damn near the same results from a regrind.. Or you can buy them and use the exshust cam on your intake side and get good results.. So buy them!! lol..

[SmokeyTheBear]

Considering I don't ever understand what you are saying, please stay off my threads, just an FYI.

nevermind then.

[dat lobudjet dude]

i got a 91 ex cam in tha garage i'll let go for 30 bucks deliver as far as fay town!

[dat lobudjet dude]

i have a spare 91 ex cam and gear in the garage i'll let go for $30 i've noticed that peeps try to sell the intake side with it just to get ride of it. but not me i got the important one ship as far as faytown holla

[Samurai]

Can anyone help me out with the instuctions on how to replace the intake with exhaust? Is it farely simple?

How much does it usually cost to get the reground? I haven't heard of that...how would I search for someone that does that? Just a machine shop?

[SmokeyTheBear]

what happened to your 5.0 swap?? i won't get technical because im sure that would be way too far over your head.

[Samurai]

Like I said, if you don't know me...THEN GET THE FUCK OFF MY THREAD. I don't believe I asked YOU for my life update. I never said I WAS going to do it. I said I was looking for information. BTW, what ever happened to your brain swap?

[Samurai]

Brain swap? Oh, I don't want to get to far over your head. I am looking for information on how to get the best out my car, if you don't have USEFUL information to contribute, then don't get on my threads, seriously. Besides, I don't remember asking you. I was asking people with ACTUAL information. If you want to put information on my thread, then don't be so vague. I am looking for information, if you think you have information that I could benefit from, then by all means post it, but don't come on here being your stupid self.

[SleeperTec]

I am looking for information on how to get the best out my car.

Take that crap KA truck engine out of it and swap an SR or RB.. :D


Also.. I come on here to view discussion about automotive related stuff.. The drama needs left to PM's.

[SmokeyTheBear]

Brain swap? Oh, I don't want to get to far over your head. I am looking for information on how to get the best out my car, if you don't have USEFUL information to contribute, then don't get on my threads, seriously. Besides, I don't remember asking you. I was asking people with ACTUAL information. If you want to put information on my thread, then don't be so vague. I am looking for information, if you think you have information that I could benefit from, then by all means post it, but don't come on here being your stupid self.

wtf do you mean vague?? the cams your looking for for a performance boost are 91-93 KA exhaust cams. i was actually trying to help, the information i posted is correct, i don't see why you are such a nasty person.

[Tibby]

She's actually a pretty fun girl to be around.

Good luck, Sam.

[SleeperTec]

I have a set of stock KA cams that are in great shape.. $70 + $10 shipping Pay-Pal me the $ to monicamfields@hotmail.com.. Call me 479-841-5883

...

[Samurai]

Take that crap KA truck engine out of it and swap an SR or RB.. :D


Also.. I come on here to view discussion about automotive related stuff.. The drama needs left to PM's.

The RB just cost to damn much. I would love to do it, but I am just not experienced enough for one thing and I don't have that kind of money. I am looking to do some mods to the s-13, I am just still doing some research.

I think I am going to buy a '96 teggie in a week, if it is still there. I am pretty excited about that!!

I don't think I am going to do the cams anymore. I spoke with CJ and he said when he did his, he said he got minimal power for what he paid. So, so I might do what you said and swap in the intake for exhaust instead of replacing them with Crower's or something. When I do the intake for exhaust swap, do I have to swap out the gear?

[Samurai]

She's actually a pretty fun girl to be around.

Good luck, Sam.

thanks tibby! I haven't talked with you in a while! We need to get together when I come up....

[Samurai]

just fyi, its only 91-93 exhaust cams, thought i would specify.

It sounds to me like you were trying to tell ME what I want. I did not just want exhaust cams, I want to replace both with some nice Crower's but I didn't want to spend $400 for them. I was trying to get advice on what to do instead of spending $400.

[dat lobudjet dude]

damn dude i just let go a ka24de 4-2-1 headers and 3" cat back for $230

[Samurai]

well, that sucks :( well, if you hear of anthing else lemme know. I am really taking any kind of information if you have any on some cheap easy mods, then I can build my way up to the harder, more expensive.

[SmokeyTheBear]

It sounds to me like you were trying to tell ME what I want. I did not just want exhaust cams, I want to replace both with some nice Crower's but I didn't want to spend $400 for them. I was trying to get advice on what to do instead of spending $400.

yeah, i knew what you were talking about. there is no point in buying a bad ass set of cams unless your doing a full engine/head build, that is why i recommended the 91-93 exhaust cam setup, way way way cheaper and more gains for the money spent.

[SleeperTec]

take that $ your using to buy that teggy and order this today!

Bada Bing!

http://passwordjdm.com/S13-Silvia-Black-Top-Front-Clip-P1595C202.aspx

[srs14]

The RB just cost to damn much. I would love to do it, but I am just not experienced enough for one thing and I don't have that kind of money. I am looking to do some mods to the s-13, I am just still doing some research.

I think I am going to buy a '96 teggie in a week, if it is still there. I am pretty excited about that!!

I don't think I am going to do the cams anymore. I spoke with CJ and he said when he did his, he said he got minimal power for what he paid. So, so I might do what you said and swap in the intake for exhaust instead of replacing them with Crower's or something. When I do the intake for exhaust swap, do I have to swap out the gear?

you can use the cam gears you already have , i will dig up the thread soon on how to do it and post it but from what i remember you just put the 93 exhaust in place of the intake and then put the chain about 7 link away from the factory timing marks. ill also post some more info when i get home .....lol your not soppose to be able to get on the internet from work but im a gangster like that:thumbup: sorry i haven't got to your pm sam, i have been busy putting a turbo on a lexus sc300 + 40 hours at work.

edit: ps. i think the RB20 swap is going for cheaper than a good sr right now. but you will spend more trying to put it in. could be wrong though.

[srs14]

here is some info on a guys experience with cams. his setup is a stock 93 auto twin cam ka. click me (http://forums.nicoclub.com/zerothread?id=152578&page=1)

more info on swapping ka cams from other ka's

click me (http://forums2.freshalloy.com/showthread.php?t=148075&highlight=ka+exhaust+cam+swap)

edit and some more info.click me (http://forums2.freshalloy.com/showthread.php?t=58953&page=2&highlight=ka+exhaust+cam+swap)

[Forest]

Yea, there is a pic on zilvia somewhere that has a nice diagram of how far to rotate ththe cam, but i cant seem to find it.

[srs14]

i found the pis @ http://forums.nicoclub.com/zerothread?id=62997 but it doesnt work. im sure its somewhere though.



here is a guide to swapping out cams , and its by one of the gods of nissansclick me (http://jimwolftechnology.com/wolfpdf/CAM%20INSTALL%20INST%20FOR%20KA24DE.PDF)

[srs14]

single to dual cam swap info to answer your pm. i know it might be backwards but it will give you an idea.click me (http://forums2.freshalloy.com/showthread.php?t=81305&highlight=sohc+dohc+ka)

[SmokeyTheBear]

those are great. i think thats exactly what she is looking for.

[srs14]

need anything else sam?

[Samurai]

no i think that is it for now brian, thanks a lot man ;)

[Samurai]

Actually, I have a dual cam. I was looking for a cheap way to mod my cams or buy more. I have been give the choices to ground down my present cams (stock), swap intake cam for exhaust cam, or spend $300 and buy Crower's. I think I have pretty much decided to do the intake for exhaust I did research on Google for that swap and I found a lot of info on it. Thanks for your help BRAIN!! :) If I need anything else I will ask, thanks :)

[SmokeyTheBear]

Actually, I have a dual cam. I was looking for a cheap way to mod my cams or buy more. I have been give the choices to ground down my present cams (stock), swap intake cam for exhaust cam, or spend $300 and buy Crower's. I think I have pretty much decided to do the intake for exhaust I did research on Google for that swap and I found a lot of info on it. Thanks for your help BRAIN!! :) If I need anything else I will ask, thanks :)

wait wait wait, you mean, what i posted originally, your going to go with what i say?? omg hell just froze right over.

[Samurai]

Hahaha Aren't you cute. lol :)

[af4g63]

can anyone tell me if the motormounts are the same in the sohc and dohc ka's?

[srs14]

should be

[dat lobudjet dude]

$30 bucks with a gear thats purdy cheap i dont need it goin sr pm me if u want it late

[SmokeyTheBear]

can anyone tell me if the motormounts are the same in the sohc and dohc ka's?

pretty sure they are the same. you don't have to change mounts when you go from sohc to dohc.

[TABA]

if your skilled its a cheap fix but some good window weld or polyurethane construction adhesive around them mounts will stiffen em up some.....

as far as cams......i think with a good N/A no nO2 build a simple Ex cam-swap is good...Crowers stage 2's are better, but the money for gains can be well placed in other areas first ;)